Hobbyduino Mini Proto Plug V2.0



Build It

Related Links



More mounting options!  I have developed a prototype shield in my pursuit to make it easier to use the Hobbyduino.  This shield allows a breadboard to be mounted on it for prototyping circuits.  It also has a circuit layout in reference to a breadboard that allows for permanent mounted circuits.

Here is the Hobbyduino Mini:

Here is the Proto Plug:

Here is the Hobbyduino Mini mounted on the proto plug:

The proto plug can also be used for permanent circuits by not installing the breadboard.  Here is a bare proto board.


  • Schematic – PDF
  • PCB – PDF
  • Schematic – SCH
  • PCB – PCB
  • Mechanical Drawing – DXF
  • Bill of Materials – TXT

The schematic and PCB was developed with the freely available ExpressPCB software.

Build It

Reference the B.O.M above for a list of the parts necessary to complete the Hobbyduino Mini Proto Plug.

Reference the below schematic and layout file for component locations.

Related Links

Hobbyduino Mini Proto Plug Gallery


This example shows hardware and software used to implement the design.  It is recommended the viewer use sound judgment in determining and/or implementing this example for any particular application.  This example may include information from 3rd parties and/or information which may require further licensing or otherwise.  Additional hardware or software may be required.  Hobbybotics or any affiliates does not support or warrant this information for any purpose other than a design example and takes no responsibility for any mishaps (none being implied).


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s